| |
| UltraScan
Gauge |  |
| The
scangauge is a scan tool, digital gauge and trip computer all in one small package.
The dimensions of the ScanGauge are 4.8" wide by 1.5" high by 1.0"
deep. The cable is detachable at the ScanGauge and can be connected on the Back
or side of the unit. Once connected to your vehicles OBDII port, the ScanGauge
automatically negotiates communications with your computer. |
| | | The
Scan Gauge can be used to read and clear trouble codes in the computer. |
| | | Data
captured when the Trouble Code was set can be recalled to help troubleshoot the
problems (was the temperature hot or cold, speed high or low, etc.). The ScanGauge
can be used to clear the trouble codes and data which will turn off the warning
(Check Engine, Service Engine soon, etc.) lamp. | | |
| The ScanGauge
can display up to 4 of 12 possible gauges at one time. |
| • Fuel
Economy | | • Fuel
Rate | | • Battery
Voltage | | • Coolant
Temperature | | • Engine
Speed (RPM) | | • Vehicle
Speed (MPH) | | • Engine
Load | | • Throttle
Position | | • Ignition
Timing | | | | The
GAUGE mode can display instantaneous fuel economy, but small variations in throttle,
terrain or even wind will cause this to wander around some. The CURRENT trip computer
and its RESET capability can smooth this out over a longer distance. |
| | | |
| 
| |
